Browse our extensive range of high quality marine products at Promt Parts

69 32927

ULTIMATE GREY SILICONE CARTRIDGE 269G

J-B Weld ultimate grey gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where higher torque or closely spaced bolt profiles can lead to higher loads and cause gasket and sealing failures for average silicones. Upon curing, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 260C intermittent and is great for many automotive applications.
Ultimate grey RTV gasket maker and sealant.
Designed for use in mechanical assemblies.
Use in higher torque and higher load applications.
Temperature resistance up to 260C.
Set time: 1 hour, Cure colour: Grey.
Read more...

$63.91 (excl GST)

Stock Qty: 5+

69 24213

PERMA-LOCK 13 ML BLUE THREADLOCKER

JB Weld Thread Lockers provide a reliable and superior lock and seal for threaded fasteners. Ideal for use on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. Suitable for applications such as rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and vibration sensitive items.
Medium strength for easy disassembly.
Ideal for fastener applications requiring easy disassembly with hand tools.
Provides a reliable, superior lock and seal.
Temperature resistant to 149C.

Read more...

$38.19 (excl GST)

Stock Qty: 5

69 32329

ULTIMATE BLACK RTV SILICONE 85G

J-B Weld ultimate black gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where maximum petroleum and oil resistance is required. Upon curing, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 500F intermittent and is great for many automotive applications.
Ultimate black RTV gasket maker and sealant.
Designed for use in mechanical assemblies.
Maximum petrol and oil resistance.
Temperature resistance up to 260C.
Set time: 1 hour, Cure colour: Black.
Read more...

$26.93 (excl GST)

Stock Qty: 5

69 50099

STATIC MIXERS 2 PACK

16 elements to ensure proper mixing everytime.
Works on all JB weld syringes.
Precision tip for dispensing control.
2 pack.

Read more...

$15.92 (excl GST)

Stock Qty: 5

69 24236

PERMA-LOCK 36 ML BLUE THREADLOCKER

$73.26 (excl GST)

Stock Qty: 4

69 8265S

COLD WELD STEEL EPOXY TWIN 28.4GR TUBES

This cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, it sets in 4-6 hours to a dark grey colour. A full cure is reached in 15-24 hours. The product has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.
Can be shaped, tapped, filed, sanded and drilled.
Cure time: 15-24 hours, Cure colour: Dark grey.
Strength: 3960 psi, Set time: 4-6 hours.
Great for household repairs, automotive projects, plumbing and marine applications, crafts etc.

Read more...

$25.46 (excl GST)

Stock Qty: 3

69 8267S

STEELSTIK EPOXY PUTTY STICK 57GR

SteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be moulded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey colour, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.
Repairs or rebuilds anything made of metal.
Can be tapped, filed, machined and drilled.
Strength 900 psi, Set time: 5 mins.
Cure time: 1 hour, Cure colour: Dark grey.

Read more...

$26.26 (excl GST)

Stock Qty: 3

69 8272

MARINE WELD EPOXY TWIN 28.4GR TUBES

MarineWeld is a specially formulated two-part epoxy cold weld system. Provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminium, metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours at room temperature and has a 1:1 mixing ratio. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. Great for boats, personal watercraft, in/outboard engines and deck & hull accessories. Use on epoxy & adhesives, fiberglass, under water/wet and more.
Can be shaped, tapped, filed, sanded and drilled.
Waterproof when fully cured.
Strength: 3960 psi, Set time: 20-25 mins.
Cure time: 15-24 hours, Cure colour: Dark grey.

Read more...

$27.71 (excl GST)

Stock Qty: 3

69 8276

KWIKWELD EPOXY TWIN 28.4GR TUBES

KwikWeld is a fast setting version of the original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. Use on automotive, brick, concrete, epoxy & adhesives, fiberglass, metal and more. J-B KwikWeld cures to a dark grey colour. Rated at a tensile strength of 2424 PSI. Will withstand temperatures up to 300º.
Can be shaped, tapped, filed, sanded and drilled.
Strength: 2424 psi, Set time: 6 mins.
Cure time: 4-6 hours, Cure colour: Dark grey.

Read more...

$27.71 (excl GST)

Stock Qty: 3

69 50165

COLD WELD STEEL EPOXY SYRINGE 25ML

J-B Weld two-part epoxy cold weld system provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey colour and will withstand temperatures up to 300 degrees F.
Two-part, cold weld epoxy system.
Creates strong, long lasting repairs.
Can be shaped, tapped, filed, sanded and drilled.
Strength 3960 psi, Set time: 4-6 hours.

Cure time: 15-24 hours, Cure colour: Dark grey.Read more...

$35.18 (excl GST)

Stock Qty: 3

Anodes

Boating Accessories

Cooling Systems

Drive Parts

Drive Parts

Electrical

Engine Electrical

Internal Engine

Fuel Systems

Ignition Systems

Oil/Lube & Engine Care

Propellers

Rigging

Steering & Controls

Tools/Shop Supplies

Shop by Brand

You are here

69 32927

ULTIMATE GREY SILICONE CARTRIDGE 269G

69 24213

PERMA-LOCK 13 ML BLUE THREADLOCKER

69 32329

ULTIMATE BLACK RTV SILICONE 85G

69 50099

STATIC MIXERS 2 PACK

69 24236

PERMA-LOCK 36 ML BLUE THREADLOCKER

69 8265S

COLD WELD STEEL EPOXY TWIN 28.4GR TUBES

69 8267S

STEELSTIK EPOXY PUTTY STICK 57GR

69 8272

MARINE WELD EPOXY TWIN 28.4GR TUBES

69 8276

KWIKWELD EPOXY TWIN 28.4GR TUBES

69 50165

COLD WELD STEEL EPOXY SYRINGE 25ML